Pick a sheet size to start, or browse ready-made transfers.
Pick a sheet size to start, or browse ready-made transfers.
Add full-color graphics to smooth hard surfaces — tumblers, glass, metal and acrylic — with physical UV DTF transfers. No heat press: clean the surface, press the sticker down and peel the carrier. Physical product — no digital download is included.
Start your order
Three workflows, one result: a physical UV DTF transfer, ready to apply by hand.
Upload one logo or design, choose the physical sticker size and quantity — from 1 to 22 inches, cut to your shape.
Your complete UV sheet is already built? Upload the finished file, pick the sheet size and send it to production.
Upload separate graphics, set real sizes, duplicate what you need and arrange the sheet online before checkout.
They share a name, not a workflow. UV DTF decorates hard surfaces by hand; apparel DTF is heat-pressed onto fabric. Never use garment press instructions on a UV DTF sticker.
| UV DTF stickers | Apparel DTF transfers | |
|---|---|---|
| Made for | Smooth hard surfaces — tumblers, glass, metal, acrylic | Fabric and garments |
| Applied with | Firm hand pressure — peel and apply | A heat press |
| Heat required | None | Heat and pressure |
| Where to order | Right here on this page | On the DTF Transfers page |
Printing for fabric? Use the DTF Transfers hub instead — the link is at the bottom of this page.
Application
UV DTF never touches a heat press. Four steps by hand, on a clean, smooth hard surface.
Peel the sticker away from its backing sheet, keeping the clear top layer attached to the art.
Line it up on a clean, dry surface. It will not shift once it touches down, so position before you press.
Rub firmly from the center out with a squeegee or your thumb to push out any air.
Pull the clear carrier off slowly at a sharp angle. Wait 24 hours before washing.
Common questions
What to know before decorating tumblers, glass and other hard surfaces.
Start your order
Custom UV DTF in three workflows — or switch to apparel transfers if your project is fabric.
One design, sized 1 to 22 inches, cut to shape and ready to apply.
The four-step application, the surface guide, and care rules for decorated drinkware.
Apparel DTF transfers press onto shirts, hoodies and more with a full white underbase.
