UV DTF stickers
Stickers for hard surfaces
Printed, laminated, and kiss-cut. They go on tumblers, glass, metal, and acrylic by hand — no press, no heat, no transfer tape to fight with.
- No heat needed
- Waterproof
- Cut to your shape
UV DTF is not for fabric. For garments use a DTF transfer instead.
UV DTF Stickers
Application
How to apply a UV DTF sticker
No heat press involved. Four steps by hand, about thirty seconds each.
Separate
Peel the sticker away from its backing sheet, keeping the clear top layer attached to the art.
Place
Line it up on a clean, dry surface. It will not shift once it touches down, so position before you press.
Press
Rub firmly from the center out with a squeegee or your thumb to push out any air.
Peel the top layer
Pull the clear carrier off slowly at a sharp angle. Wait 24 hours before washing.